Faro Porcelain 5mm Pencil Round Coping Stones

Faro Porcelain Wall Coping has a simple 5mm pencil round edge profile, one of a range of profile choices produced on-site in our Bespoke Stone Centre. This not only gives you assured quality, but offers the chance to choose exactly the effect you desire, as different edge profiles reflect the light in different ways. Porcelain wall coping also adds horizontal weight, reinforcing crisp lines with a downstand or softening a line with a curved edge. Here the pencil round profile provides a subtly softened edge. We recommend that all customers read our product & installation guides before buying.

Porcelain is manufactured in batches and therefore the colour and texture may vary from batch to batch.

This may mean that the porcelain you receive when ordered may differ from the samples or showroom displays viewed before purchasing.

Different sizes are manufactured in different batches. It is therefore not recommended to mix sizes.

If you feel this may be a concern for you, please contact our sales team who will be happy to advise you accordingly.

We recommend keeping a record of the 'batch colour code' of the delivered porcelain in case further stock is required. This can be found on the box that the porcelain is packaged in, and it is usually a number followed by a letter, or a six digit number.

How is our Carbon Footprint Data calculated?

We have carried out a lifecycle assessment of our products. The lifecycle assessment calculates the total carbon emissions generated throughout the entire life of the product and includes extracting or producing raw materials, transport to the factory, manufacture, shipping and haulage, installation, maintenance and recycling or disposal.

Porcelain Steps & Copings Carbon Footprint Data - Additional Information

The CO₂ data displayed on this page only applies to the porcelain paving. The impact of the manufacturing process undertaken at our Bespoke Stone Centre is being calculated and will be updated in the future.

Product Guide Installation Guide
Dimensions	See Options Available table above
Physical Dimensions	Straight 600x300mm = 596x296mm End 600x300mm = 596x296mm Corner 600x600mm = Ext. 596x596mm with 300mm cut out
Tolerance	+/- 2mm
Product Type	Coping
Packaging	Wooden pallets, cardboard boxed, plastic straps, plastic wrap
Suitable for	Coping
Surface Finish	Natural & Sandblasted
Edges	Square
Edge Profile	Pencil Round and Drip
Profile Spec.	Straight - Both long edges pencil rounded with drip groove End - Both long edges and one short edge pencil rounded with drip groove Corner - Inner and outer edges pencil rounded with drip groove
Material Type	Vitrified Porcelain (man-made from natural materials)
Country Of Origin	Italy
Sealing	Not Required
Application	External
Weight	2200 kg/m³
Slip Resistance	>R11
Frost Resistant	Yes
Flexural Strength	>10000 N
Water Absorption	<0.01%

Install Preparation	You might encounter a white, dusty residue on the back of porcelain slabs. This is a byproduct of the manufacturing process and can erode the primer and weaken the bond between paving and bedding layer. Clean it with water and a brush before laying.
Sub Base	Double Skinned Wall
Installation Method	Full bed of semi-wet mix 5:1 sharp sand:cement mortar
SBR/Primer	Essential
Cutting	Diamond blade for Porcelain stone on a grinder, petrol cutter or table saw
Joint Width	Minimum 5mm
Batching Info	Porcelain is manufactured in batches and therefore the colour and texture may vary from batch to batch. This may mean that the porcelain you receive when ordered may differ from the samples or showroom displays viewed before purchasing. Different sizes are manufactured in different batches. It is therefore not recommended to mix sizes. If you feel this may be a concern for you, please contact our sales team who will be happy to advise you accordingly. We recommend keeping a record of the 'batch colour code' of the delivered porcelain in case further stock is required. This can be found on the box that the porcelain is packaged in, and it is usually a number followed by a letter, or a six digit number.

Aftercare

London Stone recommend this product is swept regularly and cleaned periodically using a solution of Lithofin Outdoor cleaner and a pressure washer with a wide spray. In shady gardens it may also be necessary to treat with Lithofin Algex to control the appearance of algae. For detailed aftercare advice please refer to the product guide.

Please see our FAQs for more information.

Delivery Cost

Free of charge on orders over £750 + VAT.

A flat charge of £65 applies to all orders under £750 + VAT.

Delivery Times

Choose your delivery date when checking out. Timed slots are not available.

Returns

This product is made to order and is therefore considered a bespoke item. There are no returns for bespoke or pre-sealed items, unless the item is faulty.

Please ensure you are satisfied with the product and check things such as colour, finish, sizing, and edge profile before ordering. Please contact our sales team if you require further information.